Table columns:

• Room - Selected rooms are displayed in the Preview panel and enables the Settings controls.
• Contour - A drop down list is provided in this column to select calculations for the selected room. Also included is an option "No contour" that disables contours for the selected room and calculation.

• Minimum - Displays the minimum amount of daylighting illuminance per area in the selected room.
• Average - Displays the average amount of daylighting illuminance per area in the selected room.
• Maximum - Displays the maximum amount of daylighting illuminance per area in the selected room.

• Auto scale - When on, the tool calculates the maximum and minimum values (from the point grid) for each room and scales the contour lines automatically. When off, the calculation uses the values as entered in the list.
• Link room scale - When on, the tool determines the maximum and minimum values for all the rooms, ensuring all rooms use the same scale. Enabled when Auto scale is activated.

  For instance:

  • Room 1 : Min value =5 max value = 65
  • Room 2 : Min value = 25 max value = 90

  If the values are entered in the table range from 10 to 120, then the contour lines will be placed at these values:

  No auto scale	Auto scale room 1	Auto scale room 2	Linked room scales
  10.0	5.0	25.0	5.0
  20.0	10.5	30.9	12.7
  30.0	15.9	36.8	20.5
  40.0	21.4	42.7	28.2
  50.0	26.8	48.6	35.9
  60.0	32.3	54.5	43.6
  70.0	37.7	60.5	51.4
  80.0	43.2	66.4	59.1
  90.0	48.6	72.3	66.8
  100.0	54.1	78.2	74.5
  110.0	59.5	84.1	82.3
  120.0	65.0	90.0	90.0

• Value - Used to modify the lowest value in the range of daylighting illuminance per area values assigned to a contour color.
• Color - Used to select a color to assigned to the selected daylighting illuminance per area value. Clicking inside the color column opens the Color dialog.
• Move color up/down - Used to move color selection up or down in the list. Clicking the up and down arrows only move the colors, not the entire row.
• Reset colors and values - Resets colors and values to defaults.
• Blend options - A drop down menu provides options for changing the contour colors.
  • Blend colors - When selected, a color gradient is used for the different values.
  • Blend values - When selected, values are displayed with more accuracy.